RFC 791
Networking & IT Security Blog
-
Juniper JunOS Routing-Tabellen
Geschrieben am 6. April 2009 Keine KommentareAuf Routern von Juniper Networks werden verschieden Routing-Tabellen vorgehalten. Jede dieser Tabellen besitzt eine eigene Aufgabe, die hier in tabellarischer Form dargestellt werden.
Routing-Tabellen
(Quelle: Juniper)
Routing-Tabelle Aufgabe bgp.isovpn.0 Border Gateway Protocol (BGP) reachability information for ISO virtual private networks (VPNs). bgp.l2vpn.0 BGP Layer 2 VPN routes. bgp.l3vpn.0 BGP Layer 3 VPN routes. bgp.rtarget.0 BGP route target information. inet.0 Internet Protocol version 4 (IPv4) unicast routes (–> main IP routing table) inet.1 IP multicast routes. Each (S,G) pair in the network is placed into this table. inet.2 IPv4 unicast routes. Used by IP multicast-enabled routing protocols to perform Reverse Path Forwarding (RPF). inet.3 Accessed by BGP to use Multiprotocol Label Switching (MPLS) paths for forwarding traffic (e.g. when using MPLS with traffic-engineering) inet.4 Routes learned by the Multicast Source Discovery Protocol (MSDP). inet6.0 Internet Protocol version 6 (IPv6) unicast routes. inet6.3 Populated when the resolve-vpn statement is enabled. inetflow.0 Border Gateway Protocol (BGP) flow destination (firewall match criteria) information. invpnflow.0 BGP flow destination (firewall match criteria) information within an RFC 2547 Layer 3 VPN. iso.0 Intermediate System-to-Intermediate System (IS-IS) and End System-to-Intermediate System (ES-IS) routes. l2circuit.0 Layer 2 circuit routes. mpls.0 MPLS LSPs. Contains a list of the next LSR in each LSP. Used by transit routers to route packets to the next router along an LSP. instance-name.inet.0 Table that JUNOS software creates each time you configure an IPv4 unicast routing instance. instance-name.inet.3 Table that JUNOS software creates for each BGP instance that is configured to use MPLS paths for forwarding traffic. instance-name.inet6.0 Table that JUNOS software creates each time you configure an IPv6 unicast routing instance. instance-name.inetflow.0 Table that JUNOS software creates each time you configure a routing instance. This table stores dynamic filtering information for BGP. instance-name.iso.0 Table that JUNOS software creates each time you configure an IS-IS or ES-IS instance. instance-name.mpls.0 Table that JUNOS software creates each time you configure MPLS LSPs.